Enlarge Image

Type	HLC-1XV04GG1.5P/40A/277VAC) Definite Purpose Contactor
Standard	IEC60947	UL508
Rating of Current	Ie 40A	FLA: 40A
Resistive Amps	Ith 50A	RES: 50A
Rating of Contacts Voltage	Ue 240/277V	240/277/480/600VAC
Rating of Insulation Voltage	Ui 660V	600V
Rating of Coil Voltage	Us 277V	Us: 277VAC 60Hz
Mechanical Life	1000,000 Cycle	1000,000 Cycle
Electricity life	100,000 Cycle	250,000 Cycle

 

  HLC-1XV04GG(1.5P/40A/277VAC)Definite Purpose Contactor(Follow Defers To DP Contactor),Mainly Is Suitable For 50Hz Or 60Hz, When The AC-8a Use Category Fixed Working Voltage Is 240V Or 277V The Nominal Current Up To The 40A Electric Circuit, Is Suitable For The Starting And The Control Single-Phase Motor (Or Compressor) And Other Single-Phase Loads.Mainly Uses In The Domestic Electric Appliances Profession, Specially In Air Conditioning Profession,Conforms To IEC60947, UL508 and GB14048standard.

1.Product Description

HLC-1XV04GG Is Suitable To Exchanges 50 Or 60hz, Fixed Working Voltage To 277v, Fixed Operating Current To 40A Single-Phase Load Circuit Control,At Present, Widely Applies To The Single-Phase Mechanical Device Main Circuit As Well As The Single-Phase Air-Conditioner Compressor Control.

2 .The Regular Service Conditon And Installs The Condition
a. In The Surrounding Air Temperature The Limiting Value Is +65 , Gets
Down The Limiting Value Is -25
b. The Installation Site Elevation Does Not Surpass 2000m
c. The Air Pollution Rank Is 2 Levels
d. Installs The Category Is Ii ;
e. Installment Facing The Gradient Does Not Surpass ±5°
f. Not Remarkable Undulation, Impact And Vibration Place.

3 .Main Technical Parameter
a. Contactor Coil Picking Up In 75% ~ 110% Us Reliably
Working, Its Drop Out Voltage In 20% ~ 70%Us
b. Contactor Use Category: Ac-1Ac8a
c. Contactor In With 0.4m Place, Its Noise Below 40db.

4 . Installing Specification And Install Size

a. Installs The Way To Be Fixed For The Screw, Some Two Kinds Install The Size To Choose One Kind Of Size Fitting Surface And The Horizontal Plane Are The Vertical Shape Gradient Are Not Bigger Than ±5°

b. Before The Use Should Inspect The Power Terminal And The Contactor
Quick Connect Whether Inserts Arrives, Is Reliable, Avoids Creating
The Breakdown, Behind Check Off May Electrify Tries .

• HLC-1XT04CG(1.5P/40A/120VAC)
  
• HLC-1XH04GG (1.5P/40A/480VAC) Definite Purpose Contactor
  
• HLC-1XH04CG (1.5P/40A/480VAC) Definite Purpose Contactor
  
• HLC-1XH02AAC (1.5P/30A/480VAC) Definite Purpose Contactor
  
• HLC-1XH01AAC (1.5P/25A/480VAC) Definite Purpose Contactor